Internal Pusher System

Internal Pusher

Lindner's original: tried and tested a thousand times over, our internal pusher allows for easy and secure machine feeding. Our years of experience and continuous development have left their mark on its distinctive design.

Constant shredding

due to uniform material feeding.



Easy feeding

with a completely internal construction.


thanks to the absence of guide elements.


No jamming

as a result of additional comb and sealing bars.

Robuster Leistenrotor


Thanks to the three-dimensional arrangement of the rotor knives, this exceptional system can shred almost any material like PP, PE-LD, PE-HD or also paper. As a result of the knives actively pulling in the material, output can realistically be increased by some 40 percent on average compared to previous technologies.

Maximum flexibility

thanks to the new Multiplex rotor shredding almost any plastics and other materials.



Resistant to foreign matter

due to robust design and special wear plates.

More output

and up to 40% more productivity guaranteed by the new 3D stepped rotor design.



Single-Step Belt drive


Robust, high-torque gear drive

the effective shredding of e.g. rigid plastics, fibres, nets and big bags.



Powerful shredding

due to high-torque, high-performance motors.

Optimum machine protection

thanks to the safety clutch and the drive unit’s instant mechanical disengagement in the event of incidents.


Global availability

 of all easy-change standard parts.


Control & Operation

Ergonomic operation

with activity-dependent ports for the mobile panel on the front and rear of the machine.




High availability

thanks to fast troubleshooting with smart solution-finding and integrated FAQ database.

Intuitive menu navigation

with software functions automatically opening and closing depending on the task at hand.

Zweistufiger Riemenantrieb

Plug & Go Screen Unit

The swivel-mounted, hydraulically operated screen unit allows for easy and comfortable access for maintenance and refitting. The screens are available with various mesh widths and can easily be changed by hand by just one person – so you can quickly customise the shredder to the particle size you need.

Flexible output sizes

possible with our quick-change screen units in various hole sizes.

Easy screen change

thanks to their swivel-mounted, hydraulically operated, modular design.

Extremely safe operation

with the electromagnetically locked screen access point.

Hydraulische Wartungsklappe

Hydraulic Maintenance Door

The hydraulically operated, inward-opening maintenance door allows you to quickly and safely access the cutting system for maintenance work or swiftly remove foreign objects with minimum material leaks.

Fast cleaning and readiness for different input materials

thanks to easy access to cutting unit and pusher.



Enjoy convenient access

to the rotor and counter knives for a fast knife exchange with the maintenance door at position 3.

Quick and clean removal of non-shreddables

with the maintenance door at position 2.

ATEX - Explosionsschutz

Rotor cooling system

The closed-circuit rotor cooling system allows for unproblematic shredding of temperature-sensitive materials with low melting points and prevents the final product from lumping as a result of the heat created during the shredding process.


Water sprinkling system

Our optional water sprinkling system to reduce air-borne dust at the filling area offers a central water pipe with four nozzles in the enclosed hopper with suction point which can be easily activated via the control panel or the remote control. The system is designed for year-round use (down to -25°C).



The fire extinguishing system detects sparks and overheated objects, protecting the system when easily flammable materials are being processed. The sensors monitor not only the shredder but also the discharge conveyor and where necessary trigger the extinguishing process. Thanks to the central water supply, the pressure tank is subsequently filled automatically and once again ready for use.



Our Lindner Micromat can be turned into a primary shredder and bale opener for defined material flows with the addition of our smart optional cutting feature, the optimised bale opener.



The Micromat series of single-shaft shredders is the key to processing a wide  range of plastics or other materials with maximum productivity. The winning combination of intelligent software, powerful drives and the new Lindner Multiplex rotor keeps the line continuously busy with the necessary material – all day and all night long.

Internal Pusher

Lindner's original:
constant material dosing and easy feeding guaranteed.


Robust, high-torque gear drive the effective shredding.

Plug & Go Screen Unit

Easy screen changing – refit screens quickly and very safely.

Rotor Cooling System
Water Spraying System
Fire Extinguishing Sytem
Bulky Waste Option

Variable particle sizes combined with superbly high output.

Control & Operation

Thanks to the Lindner Mobile HMI, operation and control is easy like never before. 

Hydraulic Maintenance Door

Cutting system access, Lindner style – quick, comfortable and 100% safe.



Comberplast - Micromat 1500

The Chilean plastics recycler Comberplast processes old fishing nets and lines that are collected on the coasts of Patagonia into innovative new products with the help of a Micromat 1500.

Flexible Cutting System for Plastics Recycling

March 2021. Modern plastics come in all shapes and sizes, and are used in countless applications. A flexible cutting system, based on the established Mono-Fix technology, is extending the scope of shredders for plastics recycling.

Patented SF Cutting System

November 2020. Precision with maximum efficiency: How Lindner's patented twin-shaft cutting system ensures high throughputs and a homogeneous final fraction for example in waste wood shredding. 

K2019: The New Micromat

The Lindner Micromat is a top seller in the plastics shredding market. At K 2019 the next generation will be presented along with an additional model and a new and improved universal cutting system. The shredder will be displayed in the outside area.

K 2019: New Hot-Wash System

Recyclates that are barely distinguishable from virgin material – that’s what plastics processing specialist Lindner had in mind when developing the new hot-wash system to be presented at the K 2019 in Düsseldorf.

AST Group and Lindner Launch Centre of Competence for the Sustainable Use of Resources in HDPE Products

March 2021. The manufacturer of HDPE containers, drums and bottles, AST, is investing in a new centre of competence with a complete plastics recycling line. As a project partner, they are relying on Lindner.




Technical Data


  Micromat 1500Micromat 2000Micromat 2500


Measure (LxWxH)mm3738 x 2478 x 33804217 x 2478 x 33804717 x 2478 x 3380
Filling openingmm


2290 x 24052790 x 24053290 x 2405
Filling heightmm259425942594
Outlet widthmm172522252725

Cutting Unit*

Speedmin -13 – 1473 – 1473 – 147
Standard tool Multiplex 50SMultiplex 50SMultiplex 50S
Number of knivespcs90120150
Number of screenspcs345
Final Outputmm15 – 10015 – 10015 – 100

Drive unit*

MotorkW1 x 901 x 1321 x 160


* The stated values relate to standard machine versions. The right to make technical changes is reserved.

** Variable rotor speeds require optional electronic motor speed control system and gear configuration.