HIGHLY EFFICIENT ELECTRIC BELT DRIVE
FX FAST EXCHANGE SYSTEM & MAINTENANCE
High availability
thanks to the FX (Fast Exchange) system for exchanging the entire cutting unit for maintenance purposes.
Full flexibility
to adjust to the desired output material due to quickly exchangeable shaft configurations.
Easy removal of non-shreddables
thanks to generous access to the cutting chamber.
Smart energy management system
SYNCHRON FINE (SF) CUTTING SYSTEM
Homogeneous output
for subsequent process steps thanks to Lindner's patented SF shaft design.
Low fine particle content
of less than 5% thanks to combined cutting and crushing action.
High output
due to the cutting system's aggressive intake.
SYNCHRON ROUGH (SR) CUTTING SYSTEM
Optimum productivity
thanks to the cutting system's special geometry ideal for rough primary shredding for higher output and less fines.
Resistant to solid foreign objects
such as iron mountings, screws, etc.
Maximum uptime
due to the cutting unit’s robust design.
Plug & GO Siebeinheit
Sicherheitskupplung
TORQUE-LIMITING SAFETY CLUTCH
Optimum drive protection
thanks to the drive unit’s instant mechanical disengagement.
Secure power down
with our tried-and-tested sensors.
Flexible adjustability
to the input material.
Zweistufiger Riemenantrieb
CONTROL & OPERATION
Intuitive menu navigation
due to software functions automatically opening and closing depending on the task at hand.
Super simple operation
of all shredder functions via remote control.
High availability
thanks to fast troubleshooting with smart solution-finding and integrated FAQ database.
Hydraulische Wartungsklappe
HIGHLY EFFICIENT ELECTRIC BELT DRIVE
Robust, stable
belt drive with planetary gearbox and synchronous stage.
Ultimate reliability
with particularly durable components.
Maximum potential
with up to 40% higher efficiency compared to conventional drives.
Virtually maintenance-free
due to dirt-repellent pressure ventilation.
ATEX - Explosionsschutz
Hardfacing kit
High-performance welding rod for extra long service life for heavy industrial use to protect shaft and frame.
Wasserbedüsung
Water sprinkling system
Our optional water sprinkling system to reduce air-borne dust at the filling area offers a central water pipe with four nozzles in the enclosed hopper with suction point which can be easily activated via the control panel or the remote control. The system is designed for year-round use (down to -25°C).
Feuerlöschsystem
FIRE PREVENTION SYSTEM (FPS)
Leave nothing to chance: this modern out-of-the-box Lindner FPS solution automatically detects and cools overheated particles in the waste stream while they are still on the conveyor, effectively preventing
possible sources of fire.
ACTIVE HEAT DETECTION & AUTOMATED COOLING
To avoid possible sources of fire, the IR sensor (1) detects the waste streams’ temperature on the conveyor belt right after it has passed the shredder. In this way, overheated particles are reliably detected and the cooling process triggered. In sync with the conveyor belt speed, the water nozzles (2) are activated one after the other and the temperature is lowered to below the preset threshold value.
SAFETY FIRST WITH OUR CONTROL SENSOR
The 2nd sensor unit at the upper end of the discharge belt (3) provides additional safety. If the temperature is too high, the heat source is automatically stopped under the last water nozzle, the shredder comes to a halt and the alarm is triggered.
SPACE-SAVING, SIMPLE INSTALLATION
As a heated container solution with Plug&Go connections, the Lindner FPS can be quickly installed in almost any environment. Thanks to its fully integratable, compact design, it can be easily retrofitted in existing facilities.
Beschickungseinheit für Sperrgut und Ballenware
MACHINE INFORMATION SYSTEM (MIS)
Keep productivity on track: with the right information at the right time, the Lindner MIS puts all relevant performance data and valuable additional information at your fingertips for full transparency, minimum
downtime and maximum output.
PERFORMANCE DATA AND DAILY REPORT
The Lindner MIS reads out all relevant data straight from the facility‘s machines and displays them clearly.
Using the collated data, the software generates daily reports that can be sent via email and shared with employees on noticeboards.
Additionally, the system‘s long-term analysis makes it possible to identify recurrent errors or trends so that processes can be optimized and productivity increased.
TRAINING AND MAINTENANCE MATERIALS
With the integrated training videos and short maintenance clips, it‘s quick and easy to train machine operators and find the right solution.
EVERYWHERE, EVERY TIME
Our cloud-based system displays all the information on your PC or smartphone app at any time, anywhere.
Furthermore, with the Lindner MIS it‘s possible to directly request wear and spare parts and view their processing status at any time.
WOOD SHREDDING TO THE MAX: SOPHISTICATED ENGINEERING MEETS MAXIMUM EFFICIENCY
With its powerful electric belt drive and highly specialised cutting tools, Lindner's twin-shaft primary shredder Atlas 5500 SY can turn any wood no matter the size into material that is perfectly prepared for subsequent processes, incineration or the material recycling of waste wood. Built for tough applications and equipped with the new FX fast exchange system, this shredder provides maximum uptimes and can be relied on to keep the line going. And it achieves all that with minimal operating costs, astonishing throughputs and full flexibility.
FX FAST EXCHANGE SYSTEM
Exchanging the entire cutting unit or individual shafts has never been that easy.
CONTROL & OPERATION
Take control: easily.
Optional features
ROBUST TWIN-SHAFT CUTTING SYSTEM
The cutting unit that knows now mercy.
TORQUE-LIMITING
SAFETY CLUTCH
The torque-limiting clutch prevents the drive unit from being damaged by blockages caused by foreign objects – long service life guaranteed.
HIGHLY EFFICIENT ELECTRIC BELT DRIVE
The benchmark for maximum efficiency.
Input Materials
Resources
ATLAS 5500 SY | |||
Dimensions* | |||
Measure (LxWxH) | mm | 6500 x 3440 x 5007 | |
Hopper opening (DxF) | mm | 5471 x 2280 | |
Feeding height (G) | mm | 3510 | |
Hopper capacity | m³ | 18 | |
Outlet width (I) | mm | 1560 | |
Weight | kg | 38900 | |
Cutting unit* | |||
Length | mm | 2 x 2380 | |
Speed | rpm | 18 | |
Standard tool | Synchronous 2-shaft cutting unit | ||
| SF 10.10 / SR 8.10 | |||
Drive unit* | |||
Motor | kW | 2 x 160 | |
Power control | frequency converter | ||
* The stated values refer to standard machine versions with a standard hopper (large) and raised feet.
